TSTRACKSIDEENGINES

Briggs 206 carb tuning Race-day jetting for your track, today.

Correct your known Briggs 206 setup for altitude, weather, ethanol and slide color. The Carb Tuner from Trackside Engines gives you a main jet, needle clip and air screw to start from, before you unload the kart.

$49.99 to sign up, first month included. Then $7.99 a month.

Example

Reno, NV on a warm day, 82°F

87 Pump Gas (CKNA / Event Spec) · density altitude 7,000 ft

Main jet
0.0385" → 0.0370"
Needle clip
P-4 → P-1
Air screw
2.5 → 3.5 turns
Leaner than your baseline. A racer’s own setup, corrected for the day. A starting point to verify on track.
How it works

Three steps, at the track.

  1. 01

    Enter your setup

    Pick your slide color and the tuner loads Trackside's standard setup for it. Change the main jet, needle clip and air screw to what is on your kart, and choose your fuel.

  2. 02

    Add the conditions

    Choose your track, or use your phone's location or the map. The tuner reads the current temperature, pressure and humidity, and the forecast for the next twelve hours.

  3. 03

    Get your starting point

    See the main jet, needle clip and air screw to start from, and the density altitude behind them. Save it, with your notes, to look back on next time.

What it corrects for

The four things that move your jetting.

Elevation

Track elevation from Trackside's track list, or looked up for anywhere else you race. Elevation moves the answer as much as the weather does.

Weather

Temperature, pressure and humidity combine into density altitude: the altitude the engine actually feels. Check the hours ahead before a late race.

Fuel and ethanol

Pump gas from E0 to E15, and race fuels from VP and Sunoco, corrected using their published specifications.

Slide color

Black, Green, Yellow, Blue and Red, each with Trackside's standard setup to start from.

The Trackside method

Start from the numbers. Change one thing.

The tuner’s starting points are Trackside Engines’ standard setups for the Briggs 206, and its corrections come from how air density and fuel change the mixture. It cannot see your engine. So treat every figure as a starting point to verify: make one correction, retest in the same conditions, and record what happened. Never modify a rule-controlled component or setting.

Built by Trackside Engines

Trackside Engines builds and supports Briggs 206 racing engines. The Carb Tuner puts the same race-day jetting approach in your pocket.

Visit tsengines.com ↗
Pricing

One subscription.

$49.99to sign up, first month included

$7.99a month after that, until you cancel

Cancel anytime from your account; access continues to the end of the month you have paid for. Charges are non-refundable. Trackside Engines engine customers get a lower monthly rate; ask Trackside about it.

Get started

Questions

Does it work for the LO206?
Yes. It is built for the Briggs & Stratton 206, the engine raced in LO206 classes, and for the colored slides those classes run.
Is the recommendation exact?
No, and nothing that works from the weather can be. Every figure is a calculated starting point to verify on track. Change one thing at a time and re-check. It does not replace hands-on inspection by a qualified engine builder.
Will it suggest something the rules do not allow?
It only suggests jet sizes and settings from the lists Trackside has set, and it says when a correction runs past the end of one rather than inventing a size. Always confirm the current Briggs Racing rule set and your series' rules before making a change.
Do I need a signal at the track?
Yes. The tuner reads live weather and your saved setups from your account, so it needs a connection. You can add it to your phone's home screen to open it like an app.
What does it cost, and can I cancel?
$49.99 when you sign up, which includes your first month, then $7.99 a month from one month later. Cancel anytime from your account; you keep access to the end of the month you have paid for. Charges are non-refundable.